Boilers & Heating

1. No Heating or Hot Water

• Failed pump, diverter valve or PCB
• Low system pressure or air locks
• Pilot or ignition faults on older units

2. Inefficiency

• Older non-condensing boilers waste energy
• Higher bills than necessary for the property size
• Frequent cycling on and off

3. Leaks & Corrosion

• Drips around the boiler casing
• Sludge in radiators reducing output
• Internal corrosion shortening lifespan

minor Repairs

• Re-pressurise system and bleed radiators
• Replace thermostats and timers
• Service annually for safety and efficiency

moderate Repairs

• Replace failed pumps, valves or expansion vessels
• Power-flush system to remove sludge
• Add magnetic system filter

major Repairs

• Full boiler replacement (combi, system or regular)
• Upgrade to smart zoned heating controls
• Integrate underfloor heating with new manifolds

When Replacement Is Needed

• Boiler is over 12–15 years old
• Repair costs approach replacement cost
• Renovating to add bathrooms or extensions

Installation Steps

1. 1

   Survey & Sizing

   • Calculate heat load and hot water demand
   • Choose combi, system or regular boiler
2. 2

   Remove Old Unit

   • Drain system safely
   • Decommission old gas and water connections
3. 3

   Install New Boiler

   • Mount, flue and connect to gas, water and condensate
   • Fit filter and inhibitor
4. 4

   System Flush

   • Power-flush radiators and pipework
   • Dose with corrosion inhibitor
5. 5

   Commission & Certify

   • Test gas pressure and combustion
   • Issue Gas Safe and Benchmark certificates