Patios

1. Uneven & Sunken Areas

• Ground movement causing misalignment
• Slabs sinking in places

2. Cracked or Chipped Slabs

• Damage across surface from wear or impact

3. Loose Paving

• Failed or deteriorated bedding mortar

4. Worn Jointing

• Jointing worn, missing, or eroded
• Allows weed growth between slabs

5. Poor Drainage

• Standing water in low spots

6. Unstable Edging

• Edging and borders deteriorated

minor Repairs

• Repointed joints using mortar or specialist compound
• Re-secured or repaired edging

moderate Repairs

• Lifted and removed damaged or uneven slabs
• Re-prepared and re-levelled sub-base
• Re-laid existing usable slabs on fresh mortar bed

major Repairs

• Replaced damaged units with new matching slabs/porcelain/stone
• Adjusted levels to ensure proper fall for water drainage
• Full patio relay with new sub-base

When Replacement Is Needed

• Old patio beyond repair
• Creating a new outdoor living area
• Upgrading to premium materials

Installation Steps

1. 1

   Excavate Area

   • Dig to required depth for new installation
2. 2

   Install Sub-Base

   • Compacted MOT Type 1 or similar
3. 3

   Apply Mortar Bed

   • Suitable for slabs, porcelain, or natural stone
4. 4

   Lay Paving

   • To agreed pattern, layout, and finish
   • Apply priming slurry for porcelain/stone where required
5. 5

   Fit Edging

   • Retaining borders for long-term support
6. 6

   Point Joints

   • Neat jointing for durability and appearance
7. 7

   Check Levels

   • Drainage falls checked across entire area